Toontoys Forums

[slacker]

so busy as usual .. but I have managed to get a few things done in the last couple of weekends .
Built my Custom tail gate



also powder coated the guts and a couple of other pieces .




also just about finished the air intake system . I had to build a new MAF mount . So I started with the raw chunk of metal and went to work . Cut , welded and powdercoated .. very happy with the final result . Replaced the o-ring , and thread locked the new mount hardware .












_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

air intake now sealed .. just need a few more clamps





and now I think the last "custom" pieces for the engine I need to build .. new W/Washer tank , and rad overflow tank . here is where I'm starting .




.
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

finally got my window switches .. I guess the first set got lost .
I think the contrast of the billet is gonna look sweet .



got them mounted , and now I can finish the console



also , almost got my w/washer tank and rad over flow done .. just a little more to do .









just have to build the mount brackets , then I will sand blast again , TIG the top on , and then powder coat inside and out .. and done .



.
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

completed the NEW/OLD console .. I am happy with the end result .




.
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

finally found some time today to get the tops welded ,



and then got the tanks powder coated



also got my wiper blades done .





.
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

got my reservoirs installed .







also worked a bit on the wiring and got my center console in




.
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

building a new custom piece .. only avaliable from me .
not a fan of the pillar guage pod , I decided to make my own version .
it will be in the center vents . First I built a "block off" for the center vent off the heater .. fits perfect ! i'm now building the center pillar mould , and thought I would share some pics

hope you enjoy









something like that


.
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

here it is ..
paint matched , and installed .
I set the cover in the truck so you could see what it's going to look like ..








.
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com

[slacker]

all pics reposted to yodatech ...

https://www.yotatech.com/forums/f209/toyotafiberglass-mojave-tribute-build-285276/


not doing it here being NONE of the admins even come here anymore !!
_________________
/86 Toy 4x4
/84 toy custom 2wd hotrod 7mgte intercooled , lambo doors and custom fiberglass
check out my employer @ http://www.toyotafiberglass.com