Toontoys Forums Forum Index Toontoys Forums

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Project SPL Taco

 
Post new topic   Reply to topic    Toontoys Forums Forum Index -> Hard Core Corner
View previous topic :: View next topic  
Author Message
manethon



Joined: 14 Jan 2011
Posts: 80
Location: SASKATOON

PostPosted: Wed Mar 30, 2011 9:06 am    Post subject: Project SPL Taco Reply with quote



THe goodies...


sliders painted with primer after cleaning with acetone.
Then painted with rockguard from canadian tire
MY garage is to small so i had to put the wet sliders in the middle and drive over them to have everything fit in.



leaf pack installation






everything went pretty smooth other than one bolt not wanting to let go!

then i got to installing the W.e remote res shock!



Well after opening up the flange up a bit,
And really had to force it in there, had to use
One of those rods that goes skinny to thick to
Basically manipulate it.




I found that using a clamp worked well to get the sleeve into proper position.



The work station. Gotta love working outside with the snow and wind.


Bad picture of skidplate



big 3 Upgrade

running the wires to the back


battery with temp wiring for the system

Everything is removed now. Preparing for final walled build
sum of the old goodies that im getting rid of to make room for the new stuff


front door work - made fibreglass covers for all holes to seal them up








proposed new front door speaker lay out

The batteries

first box- designed to still be able to have 4 people in truck








Prior to batteries( 62lbs x 12 )



Slight drop,I'm sure they will sag a bit once the batteries sit there for a bit




the basic box design

530 sq port tuned at 45hz with the 6 inch baffle

Need about 60-80 studs and 12 sheets of 3/4


Last edited by manethon on Tue Apr 05, 2011 5:11 pm; edited 3 times in total
Back to top
View user's profile Send private message
the Dude



Joined: 05 Dec 2003
Posts: 3608
Location: Saskatoon

PostPosted: Tue Apr 05, 2011 5:37 pm    Post subject: Reply with quote

that is FRICKEN awsome!! Nice truck, nice build!
_________________
Brad T.

ΜΟΛΩΝ ΛΑΒΕ
Back to top
View user's profile Send private message
fj-rankenstein
moderator


Joined: 06 Dec 2003
Posts: 4209

PostPosted: Tue Apr 05, 2011 5:46 pm    Post subject: Reply with quote

hey!! there ya go!!! good progress so far!!!
_________________
"If you need a tool and don't buy it, you will ultimately find that you have paid for it but don't have it". -Henry Ford

my yard looks like a toyota dealership circa 1980
Back to top
View user's profile Send private message
manethon



Joined: 14 Jan 2011
Posts: 80
Location: SASKATOON

PostPosted: Tue Apr 05, 2011 6:04 pm    Post subject: Reply with quote

I'll try keep it updated as much as I can
Battery rack,
Cabmount chop
Custom made box cover.

After the Audio build:

Rock monster beadlock
35x12.5x17 general grabber
Arb lockers w 4.56 front and back
rear high clearance bumper
Front Ap lt kit w fenders











Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Toontoys Forums Forum Index -> Hard Core Corner All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
Protected by Anti-Spam ACP